Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B8
- Years 2007-2016 LED lights have undoubted advantages over incandescent bulbs, especially in terms of efficiency and light tone. There are many aftermarket kits on the market for replacing interior lights with LED lights. In this video, we see how to mount and replace the front and rear ceiling lights, the courtesy door lights and, finally, the license plate lights. Attention, that the contacts of the LED lights are polarized, so if they do not work if inserted one way, they must be turned. The Audi A4 model described here is the one in production since 2007.
Posted on 21 June 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |