Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlight Bulbs on the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Tail light bulb

This guide will show you how to remove and replace the rear headlight bulbs on the Audi A4. First, open the trunk and start removing the side trim; then, unscrew the headlight screw and disconnect the bulb electrical connector, removing the headlight from the outside, as shown in the video. At this point, separate the bulb holder from the housing, replacing any faulty stop bulbs with new ones (with the same base); finally, reassemble the rear headlight, testing the operation of all stop lights.

Posted on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulbs of the Audi A4.
How to replace the rear light bulbs of the Audi A4.
Audi A4 (2007-2016 / B8) Briefly, we will see the instructions that will allow us to disassemble and replace the bulbs of the rear light of the Audi A4. First, let's open the…
Replacing the Rear Light on Audi A4
Replacing the Rear Light on Audi A4
Audi A4 (2000-2004 / B6) Remove the rear light to replace it or to change the damaged bulbs inside. Lift the trunk. Get a socket wrench, remove the screw cover cap on the sid…
How to disassemble the interior light fixture of the Audi A4
How to disassemble the interior light fixture of the Audi A4
Audi A4 (2004-2008 / B7) This short and simple guide will show us the process of disassembling and replacing the ceiling light fixture and its bulbs in the Audi A4. First, we…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos