Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. A4
  6. : Disassembly of float / fuel level sensor Audi A4 2.0 TDI

Audi A4 - Video tutorial

Model: Audi A4 B7 - Years 2004-2008
Part: Fuel pump
Operation: Disassembly of float / fuel level sensor Audi A4 2.0 TDI

In this video tutorial we will see how to disassemble and then replace the float or fuel gauge of an Audi A4. We get inside the car and first remove the rear bench, levering and releasing it by hand; after which we remove the cover of our float, unscrewing the screws with a screwdriver, and we go to disconnect its electrical connector by pressing on the tab. At this point we are going to remove the ring nut and extract our fuel level sensor, as shown in the video. We just have to replace it with the new one!


Posted on 18 January 2024 by ScegliAuto

    Frequently Asked Questions

    • A4 2007-2016 - Where is the fuel pump relay located in the Audi A4? Read Answer
    • A4 2007-2016 - Where is the tank float located in the Audi A4? Read Answer
    • A4 2004-2008 - Where is the fuel pump located in the Audi A4? Read Answer
    • A4 2007-2016 - Where is the high pressure fuel pump of the Audi A4 TFSI located? Read Answer
    • A4 2000-2004 - Where is the fuel pump of the 2002 Audi A4 located? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos