Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Light and Replacing Bulb on Audi A3 8P

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Tail light

In this video tutorial, learn how to remove the rear light and replace its bulbs on an Audi A3 8P, from 2002 to 2012. First, open the boot and remove the plastic screw of the light using a flathead screwdriver; then, you can remove the light from the outside, possibly using a lever. Once removed, disconnect the electrical connector of the bulbs and access them by releasing the clips of the bulb holder; replace them with new ones if necessary and reassemble everything by following the reverse procedure!

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlamp Bulb on an Audi A3
How to Replace the Rear Headlamp Bulb on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Before you begin, open the boot of your Audi A3. Start by unclipping and removing the internal cover of the rear headlamp fixing nut, which you will …
Replacing Front Bulb on Audi A3
Replacing Front Bulb on Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to replace the front bulbs on an Audi A3? First, lift the front bonnet of the car and locate the back of the headlamp: you will find a cover cap.…
Removing the Headlight Bulb of an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to remove the headlight bulb of an Audi A3? Lift the front bonnet to access the front headlights and replace the bulbs. Remove the plastic cover …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos