Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine temperature sensor on Audi A4 B6 1.8T

Model: Audi A4 B6 - Years 2000-2004
Part: Engine coolant temperature sensor

Today we will see the instructions that will allow us to remove the coolant temperature sensor bulb on an Audi A4 B6, second series, with 1.8 turbo engine. First of all we open the bonnet of our car and we go to identify the sensor, which we find on the back of the engine; we will have to remove the coolant duct, where our temperature sensor is housed inside: disconnect the various pipes and unscrew the fixing screws. At this point we lift the tab of the duct to extract the bulb sensor, replacing it with the new one!

Posted on 23 May 2021 by ScegliAuto

Video tutorial

Related tutorials

Replacing the power steering fluid (power steering) on the Audi A4 B6
Replacing the power steering fluid (power steering) on the Audi A4 B6
Audi A4 (2000-2004 / B6) In today's video tutorial we will see how to replace the power steering fluid (power steering) on the Audi A4 B6, in simple and quick steps. First of…
How to change the remote control battery on the Audi A4 B8
How to change the remote control battery on the Audi A4 B8
Audi A4 (2007-2016 / B8) Let's see in this short video how to remove and replace the key remote control battery on the Audi A4 B8, but also on the A5 Sportback and A6 in simp…
How to remove the passenger compartment fan on the Audi A4 B8
How to remove the passenger compartment fan on the Audi A4 B8
Audi A4 (2007-2016 / B8) We see in this video the instructions to remove and replace the passenger compartment fan on the Audi A4 B8, in simple steps. First of all we open th…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos