Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light on the Audi A4 B8?

Model: Audi A4 B8 - Years 2007-2016
Part: Tail light

Today we will see the instructions that will allow us to disassemble and replace the rear light of an Audi A4 B8. First of all we open the tailgate and start by removing the side plastic cover covered in carpet; then we are going to unscrew the plastic fixing screw of the light, as shown in the video. At this point we can extract the light from the outside, pulling it towards you; then disconnect the electric cable of the bulbs. Now we can replace the light bulb or the headlight itself; to remove the other part of the headlight it will be necessary to remove the trunk panel and unscrew the fixing screw!

Posted on 19 June 2021 by ScegliAuto

Video tutorial

Related tutorials

Removal of the rear light on the Audi A4
Removal of the rear light on the Audi A4
Audi A4 (2007-2016 / B8) Do we want to remove the rear light of our Audi A4? Let's see how to remove the rear light from inside the car tailgate. We open the luggage compartm…
How to disassemble the third brake light of the Audi A4
How to disassemble the third brake light of the Audi A4
Audi A4 (2014-2024 / B9) Today's instructions will allow us to disassemble and replace the tail light or third brake light of the Audi A4, in simple and quick steps. First, w…
How to replace the headlight bulb of the Audi A4
How to replace the headlight bulb of the Audi A4
Audi A4 (2004-2008 / B7) To replace the rear headlight bulb of an Audi A4 model b7, we need to: - open the trunk; - unscrew the screw located on the inside, towards the headl…

Other guides you may be interested in

How to Remove the Spark Plugs on a Subaru Forester

In this video, learn how to remove the spark plugs on a Subaru Forester. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the cylinder head, the air filter kit (if necessary), then disconnect the coils by hand, unscrew the spark plugs with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them properly, secure the ignition coils, refit the previously removed panel and the air filter kit. Close the engine bonnet.

Watch the video!


by ScegliAuto

More videos