Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

Want to remove the rear light on your Audi A4? Let's see how to take it off from inside the trunk. Open the trunk, locate the plastic covers of the rear light.

Remove the covers, then unscrew the securing screws behind the light using a screwdriver. Once all screws are removed, detach the rear light from its housing (disconnect the power connectors).

After removing the rear light, replace any damaged bulbs with new ones, or replace the entire light if it is damaged. Reinstall the light with the screws and power connectors.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Replace Rear Headlight Bulbs on Audi A4
Replace Rear Headlight Bulbs on Audi A4
Audi A4 (2007-2016 / B8) Remove the rear headlight to access the damaged bulbs on the Audi A4. Open the trunk, remove the plastic cover from the trunk (side). Unscrew the ret…
How to replace the rear headlight bulb of the Audi A4
How to replace the rear headlight bulb of the Audi A4
Audi A4 (2007-2016 / B8) Today we will explain how to replace the rear bulbs of the headlight of an Audi A4 model B8 produced from 2007 to 2015. To replace the bulb, we must …
Remove the Front Headlight on Audi A4
Remove the Front Headlight on Audi A4
Audi A4 (2000-2004 / B6) Removing the front headlight on an Audi A4. Open and lift the hood. Remove the upper screws located above the front headlight. Once all the headlight…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos