Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery of an Audi A4

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Key

See other generations:
Video tutorial

Start by inserting the head of a small flathead screwdriver into the slot in the middle of the key. This will slightly open the key; to fully open it, simply pull apart. Once the key is separated into two parts, set the upper half aside temporarily, as you will be working on the lower half of the key. To access the battery, gently pull on the vertical half of the lower part of the battery.

When you have access to the battery, use a flathead screwdriver to remove it. To install the new battery and reassemble the key, simply follow the steps in reverse, and you will have successfully completed the battery replacement.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Audi A4 (2014-2024 / B9) Start by pressing and holding the button located on the back of the key fob for your Audi A4 to extract the physical key. Once you have removed the p…
Audi A4 (2004-2008 / B7) Start by pressing and holding the button on the top side of the key fob of your Audi A4, which will open the physical key. Then, using a flathead scr…
Audi A4 (2004-2008 / B7) Today's instructions will show you how to remove and replace the battery in an Audi A4 by following these simple steps. First, open the hood of the v…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos