Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the key battery of the Audi A3?

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Key

In the attached video we can see how to open the remote control of the Audi A3 and change the low battery. It is a very simple and fast operation, we need a flat tip screwdriver and obviously the replacement battery, model CR2032 3V. To open the remote control, we start by extracting the key by pressing the small button. In the part of the metal ring there is a slot, insert the screwdriver inside it and lever to disengage the rear door. Once loosened, open it completely with your hands and we will have the battery ready to be replaced, obviously respecting the right polarity.

Posted on 18 November 2021 by ScegliAuto

Video tutorial

Related tutorials

Audi A3 remote control battery replacement
Audi A3 remote control battery replacement
Audi A3 (1996-2003 / 8L, MK 1) Replacing the key of an Audi A3? Let's see how the battery inside the remote control key is removed. We take our ignition key and go to press the but…
Replace remote control battery on Audi A3
Replace remote control battery on Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Replace the battery of the Audi A3 key? Let's see the battery replacement. We take our remote control key and with the help of a screwdriver we pry b…
How to replace the battery of the Audi A3 8V key
How to replace the battery of the Audi A3 8V key
Audi A3 (2012-2019 / MK 3, 8V) To replace the battery in the key of your Audi A3 8v, you only need a flathead screwdriver and, of course, a new perfectly compatible battery, specif…

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos