Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the gearbox oil on the Audi Q5?

Model: Audi Q5 80A, MK 2 - Years 2017-2025
Part: Transmission fluid

To be able to change the gearbox oil of the Audi Q5, you have to lift the car via a bridge or jack and place a container in correspondence with the oil drain plug. This will then have to be removed by unscrewing it with the special key and letting all the used oil flow into the container. Once all the used oil has flowed out, the new one must be inserted, using a hose connected to a pump. By inserting the tube inside the special tank cap and pumping it, it will be possible to insert the right amount of gear oil.

Posted on 26 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to change the gear oil of an Audi
How to change the gear oil of an Audi
Audi Q5 (2008-2017 / 8R, MK 1) Before we can begin, we will have to go and raise our Audi, so that we can work underneath without hindrance. Let's start by removing the lower gear …
How do you replace the timing chain on the Audi Q5?
How do you replace the timing chain on the Audi Q5?
Audi Q5 (2008-2017 / 8R, MK 1) In order to replace the timing chain on the Audi Q5, you need to go and access the left side of the engine block, where the chain is located: to loca…
Removal of the rear seats on the Audi Q5 MK1
Removal of the rear seats on the Audi Q5 MK1
Audi Q5 (2008-2017 / 8R, MK 1) In this video tutorial we will see the main steps on how to remove the rear seats on the Audi Q5 first series, but also on the Q7, following the inst…

Other guides you may be interested in

How to Remove the Spark Plugs on a Subaru Forester

In this video, learn how to remove the spark plugs on a Subaru Forester. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the cylinder head, the air filter kit (if necessary), then disconnect the coils by hand, unscrew the spark plugs with your socket wrench, and pull them out of the cylinder head. Take the new spark plugs and guide them with the extension of the socket wrench into the cylinder head, tighten them properly, secure the ignition coils, refit the previously removed panel and the air filter kit. Close the engine bonnet.

Watch the video!


by ScegliAuto

More videos