Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Locations for the 2008 Audi A4

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

This guide shows how to access the fuse boxes on this vehicle. They are located in three areas: on both sides of the dashboard and on the right side of the trunk.

To reach the rear fuse box, which is very simple, open the glove compartment on the right side of the trunk. To access the other two boxes, after opening the front door related to the box you need to access, use a trim removal tool to pry open the side panel of the dashboard.

At this point, you can access the fuses. Check the vehicle's owner's manual for the fuse layout before performing any operations.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Audi A4 B8 Fuse Box Diagram
Audi A4 B8 Fuse Box Diagram
Audi A4 (2007-2016 / B8) This brief video guide shows all the fuse diagrams, including names, locations, and operating amperage for each fuse in an Audi A4 B8, produced from …
Where is the fuse box of the Audi A4 located?
Where is the fuse box of the Audi A4 located?
Audi A4 (2007-2016 / B8) Knowing the exact location of the fuse box of the Audi A4 is a very important operation, as it will allow you to replace one of the fuses contained i…
Audi A4 internal fuse box layout and positioning.
Audi A4 internal fuse box layout and positioning.
Audi A4 (2014-2024 / B9) Below we will see how to access the internal fuse box and how to find the fuse diagram of the Audi A4. First, we open the front driver's side door an…

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos