Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Audi A3 8V?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Service warning light

To reset the Service light on an Audi A3, turn on the ignition to access the menu that appears on the central display using the buttons on the centre console. Select the "System" option, then choose "Service and Checks": the next option to select will be "Service Intervals". A screen will open that presents the icon to proceed with resetting the light at the bottom. By selecting this option, the light will completely disappear from the instrument cluster.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Audi A3?
How to Reset the Service Light on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To reset the Service light on an Audi A3, turn on the instrument cluster and navigate through the menu on its display by turning the knob on the righ…
How to Reset the Service Light on an Audi A3?
How to Reset the Service Light on an Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) The procedure to reset the Service light on an Audi A3 involves turning on the ignition by rotating the key in the ignition switch, then locating the…
How do you reset the Service light on the Audi A3?
How do you reset the Service light on the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) It will be possible to reset the Service light on the instrument panel of the Audi A3 by turning on the instrument panel, turning the key in the corr…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos