Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Headlight height adjustment on the Audi A4

Model: Audi A4 B8 - Years 2007-2016
Part: Headlight

If our car has a self-adjusting system for the height of the headlights, it is possible to check the correct position of the headlights using a VCDS type diagnostic module. Every time we turn on the car, the control unit checks the position of the headlights by sliding them from bottom to top, testing all the adjustment range. If we connect our diagnostic system to the ODB2 socket, we can check the control unit to further verify the correct positioning, after which turn the panel off again and turn it on again and at that point the system will have been completely tested.

Posted on 1 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the height of the headlights of the Audi A4
How to adjust the height of the headlights of the Audi A4
Audi A4 (2000-2004 / B6) In this short and simple guide we will see how to adjust the height of the light beam of the front headlights of the Audi A4. First of all, let's pos…
How do you adjust the headlights of the Audi A4?
How do you adjust the headlights of the Audi A4?
Audi A4 (2004-2008 / B7) To adjust the headlights of the Audi A4, you need to open the hood so that you can access the components in the front part of the engine compartment:…
How to adjust the headlights on the Audi A4?
How to adjust the headlights on the Audi A4?
Audi A4 (2007-2016 / B8) In this tutorial, we can see how to adjust the headlights in the Audi A4, a very simple and quick operation. Let's start by positioning the vehicle i…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos