Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel flap actuator in the Audi A3?

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Fuel cap

In this tutorial we can see how to replace the fuel flap actuator in the Audi A3 8v. This is a very simple operation, we need a screwdriver and some spatula to remove the inserts. First, we insert the spatulas in the joint between the filler frame and the bodywork, then we try to unlock it. Once this is done, we temporarily remove the fuel cap to extract the frame and reinsert it once done. We unscrew the rear screws of the actuator, insert the spare part, test it and reassemble everything following the reverse procedure.

Posted on 25 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to open stuck fuel door in Audi A3?
How to open stuck fuel door in Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In the Audi A3 it can happen that the fuel filler flap gets blocked due to a fault in the fuel flap actuator or central locking, for example. In this…
How to Open Fuel Flap on Audi A3
How to Open Fuel Flap on Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How to open the fuel flap on an Audi A3? Open the fuel flap located on the left side of the car's body by pressing on it with your finger. Once you l…
How to open the blocked fuel door in the Audi A3?
How to open the blocked fuel door in the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In the Audi A3, it may happen that the fuel door gets stuck, for example due to a problem with the control button or the lock actuator. In these case…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos