Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the remote control battery of the Audi Q5?

Model: Audi Q5 80A, MK 2 - Years 2017-2025
Part: Key

In this tutorial we can see how to replace the remote control battery of the Audi Q5, a very simple and fast operation. To do this, we will not need any particular tool but only a CR2032 replacement battery. First, we press the appropriate rear button and extract the metal emergency key. Next, we grab the remote control in the indicated part, hold down the small plastic button and extract the drawer containing the battery. At this point we can proceed with the replacement of the same, taking care to position the spare in the right direction.

Posted on 17 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Audi Q5 remote control.
How to replace the battery of the Audi Q5 remote control.
Audi Q5 (2008-2017 / MK 1, 8R) The following video tutorial shows us the steps to replace the battery of the remote control of the Audi Q5 car. To replace the key battery, we need …
How to replace the battery of the 2018 Audi Q5 remote control
How to replace the battery of the 2018 Audi Q5 remote control
Audi Q5 (2017-2025 / 80A, MK 2) To replace the battery of the remote control of a 2018 Audi Q5 car, we need to press on the sides of the remote control to release the top part and t…
How to replace the battery of the key remote for the Audi Q5.
How to replace the battery of the key remote for the Audi Q5.
Audi Q5 (2017-2025 / 80A, MK 2) Briefly, we will see the steps that will allow us to disassemble and replace the battery of the key remote for the Audi Q5. First, we take our remote…

Other guides you may be interested in

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos