Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Audi Q2 service light

Model: Audi Q2 MK 1 - Years 2016-2024
Part: Service warning light

If you have just performed a routine maintenance on your Audi Q2 but the warning light keeps coming on with every start up then you definitely need to perform a simple manual reset. First insert the key and only turn on the ignition of the vehicle. Then locate the "Menu" button located under the automatic transmission lever and select the "Car" item. At this point enter "Servicing and checks", select "service intervals" and finally "reset oil change interval". Give the confirmation and a few moments later the reset is completed successfully.

Posted on 19 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How do I reset the Audi Q2 service warning light?
How do I reset the Audi Q2 service warning light?
Audi Q2 (2016-2024 / MK 1) In order to reset the Audi Q2 Service warning light, you need to turn on the instrument panel and then press the MENU button located on the central t…
How to reset the service of the Audi Q2
How to reset the service of the Audi Q2
Audi Q2 (2016-2024 / MK 1) To reset the service of the Audi Q2, the manual specifies that diagnostic equipment must be used. In reality, there is also an empirical method, whic…
How to reset the tire pressure warning light on the Audi Q2
How to reset the tire pressure warning light on the Audi Q2
Audi Q2 (2016-2024 / MK 1) Let's see in this guide how to reset the tire pressure warning light on the Audi Q2. First of all we get in the car and turn on the instrument panel;…

Other guides you may be interested in

Remove the Rear Light of a Nissan Qashqai

Remove the rear light of a Nissan Qashqai to replace the damaged bulbs. Open the boot lid, unscrew the securing bolts located at the side of the rear light using a screwdriver (or socket spanner), and once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with equivalent size and voltage pieces (replace the light if damaged). Finally, refit the light, proceeding in reverse order with the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos