Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Window Switch Replacement

Model: Audi A6 MK 3, C6 - Years 2004-2012
Part: Push button

To replace the window switch panel on the driver’s side door, you need to remove the panel: first, remove the plastic cover in front of the internal opening lever and the trim molding in the center of the panel to access the screws underneath; another screw is located just below the handle of the internal door handle; at this point, disengage the snap clips along the edges of the panel and remove it by disconnecting the connectors and the opening cable. Once the panel is removed, disconnect the connector from the window switch and release it by pressing on the side tabs. Then, install the new switch panel and reverse the steps for reassembly.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the window switch on the Audi A6?
How do you replace the window switch on the Audi A6?
Audi A6 (2004-2012 / MK 3, C6) In order to replace the window switch on the Audi A6, the corresponding door panel must be completely removed: to remove this panel, the screws must …
Repairing the Window Regulator Motor
Repairing the Window Regulator Motor
Audi A6 (1997-2004 / MK 2, C5) Unscrew the screws located next to the door and on the armrest. Remove the panel by prying with a screwdriver on the various plastic clips and then p…
Replacement of the rear speaker of the Audi A6
Replacement of the rear speaker of the Audi A6
Audi A6 (2004-2012 / MK 3, C6) In a few simple steps, we will see the process of disassembling and replacing the rear speaker of the Audi A6. First, open the rear door of the car a…

Other guides you may be interested in

How to Change the H7 Headlight Bulb on an Audi A3

When replacing the front headlight bulbs, choosing the right bulbs is certainly the first hurdle to overcome: halogen, blue white light, xenon, or LED. Once you have made your choice, installing the new bulb can be done without removing the headlight. Simply open the front bonnet, locate the protective cap of the bulb holder, and press on the corresponding latch to remove it. Then grasp the bulb's power connector and pull it out along with the bulb itself, disconnect the connector, fit the new bulb, and press it into its seat until it clicks into place.

Watch the video!


by ScegliAuto

More videos