|
Do it yourself
| |||
| ||||
How to reset tire pressure on Audi Q5 MK2
Model: Audi Q5
80A, MK 2
- Years 2017-2025
In this very short tutorial we can see how to reset the tire pressure warning light on a second generation Audi Q5, but before carrying out this operation, it will be necessary to check the correct pressure of all four tires indicated by the parent company. To carry out the reset, start by turning on the vehicle's instrument panel, now press the "menu" button on the central console, then press the central knob on the "vehicle" item and then move the knob to the left to enter another menu. Once this is done, we select the service and checks item and then the one relating to tire pressure, here we can finally perform the reset and confirm it as shown in the video.
Posted on 26 November 2022 by ScegliAuto
Video tutorial
Related tutorials
Audi Q5
(2017-2025 /
80A, MK 2)
In this tutorial we can see how to reset the tire pressure warning light in the Audi Q5, an extremely simple and quick operation, to be carried out o…
Audi Q5
(2017-2025 /
80A, MK 2)
In this tutorial, we can see how to reset the tire pressure light in the Audi Q5, an extremely simple and quick operation, to be done only once the c…
Audi Q5
(2017-2025 /
80A, MK 2)
In order to reset the tire pressure warning light on the Audi Q5, you will need to inflate the tires until they reach the recommended pressure value:…
Other guides you may be interested in
|
How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000
To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.087
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
