Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Audi A4?

Model: Audi A4 B6 - Years 2000-2004
Part: Service warning light

Video tutorial
Detailed instructions - In this tutorial, you will see how to reset the service light on an Audi A4 B6. Before performing this simple and quick operation, make sure you have completed all required maintenance tasks. Start by entering the cabin and inserting the key, then press and hold the button depicting a wrench located on the right side of the dashboard while simultaneously turning on the ignition. Once powered on, within 5 seconds and while still holding the wrench button, press the button indicating "0.0" once.

Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light in Audi A4?
How to Reset the Service Light in Audi A4?
Audi A4 (2014-2024 / B9) In this tutorial, you will see how to reset the service light in the Audi A4, a very simple and quick operation to perform only after completing all …
How to reset the service in the Audi A4?
How to reset the service in the Audi A4?
Audi A4 (2007-2016 / B8) Resetting the service in the Audi A4, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, we must have comp…
How to Reset the Service Light on an Audi A4 B7
How to Reset the Service Light on an Audi A4 B7
Audi A4 (2004-2008 / B7) In this short tutorial video, you can see the entire procedure needed to reset the service light in just a few simple steps on an Audi A4, B7 model p…

Other guides you may be interested in

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos