Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Battery

Replacing the battery in your Audi A3 is an operation that can be perfectly performed independently, albeit with a little more attention. Thanks to the following mini guide you will be able to complete the entire procedure in a few minutes and without any problems. First turn off the car and make sure it is parked on a level surface. Lift the front hood and remove the battery protective cover. Then disconnect the negative and positive pole with a 10mm spanner. At this point also unscrew the screws that hold the battery in place and proceed with its replacement. Finally, reconnect the two poles and screw the safety screws back in.

Posted on 26 February 2023 by ScegliAuto

Video tutorial

Related tutorials

How do i replace the remote control battery of the Audi A3?
How do i replace the remote control battery of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In order to replace the battery of the Audi A3 remote control, you have to press the button located in the chromed part of the remote control, so tha…
How to replace the battery of the Audi A3 8V key
How to replace the battery of the Audi A3 8V key
Audi A3 (2012-2019 / 8V, MK 3) To replace the battery in the key of your Audi A3 8v, you only need a flathead screwdriver and, of course, a new perfectly compatible battery, specif…
How to replace the remote control battery in the Audi A3
How to replace the remote control battery in the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) In today's video we see how to replace the remote control battery of the second series of the Audi A3. This tutorial also applies to the other contem…

Other guides you may be interested in

How to Remove the Window Regulator Motor from a Volkswagen Touareg

Learn how to remove the door motor from a Volkswagen Touareg. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever or screwdriver to remove the handle cover, then unscrew the screws inside with the screwdriver. Unscrew the remaining screws on the door panel and detach the retaining clips. Remove the door panel by hand, then use a screwdriver or power screwdriver to unscrew the fastening screws of the door actuator motor. Disconnect the various power terminals and replace it with a new one. Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos