Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on an Audi A3.

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Service warning light

To reset the service on the Audi A3, the first thing to do is to get into the car and close all four doors. Turn on the ignition. You will see the service inspection light turn on, which is what we want to reset. Now turn it off, because you will need to press the button on the left (the one for the clock) for a few seconds while simultaneously turning the key to the "on" position. Keep the button pressed for several seconds. Then turn the key to the "off" position. If everything went well, when you turn on the ignition again, the service light should be off.

Posted on 20 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Audi A3 service light
How to reset the Audi A3 service light
Audi A3 (2012-2019 / MK 3, 8V) In today's video we see how to proceed to reset the service light in the Audi A3. First we proceed by carrying out the maintenance recommended by the…
How to reset service light in Audi A3
How to reset service light in Audi A3
Audi A3 (2012-2019 / MK 3, 8V) In today's video we see how to reset the parameter relating to the expiration of the service in the third series of the Audi A3. First of all, rememb…
How to reset the Audi A3 service light
How to reset the Audi A3 service light
Audi A3 (2003-2013 / MK 2, 8P) In the following mini guide dedicated to all of you owners of an Audi A3 Mk2, we're going to find out how to manually reset the service warning light…

Other guides you may be interested in

How to Disassemble and Remove the Rear Camera of a Mercedes CLA

In this video, see how to disassemble and remove the camera (where the license plate light is located) from the rear hatch of a Mercedes CLA. First, open the rear hatch of the car, then remove the rear license plate. Use a screwdriver to remove the screws on the plastic trim of the hatch. Disconnect the plastic trim of the license plate light from the hatch, and use a screwdriver to remove the retaining clips (located between the hatch metal and the plastic trim). Finally, remove the rear camera located in the hatch (disconnect the power connector of the camera) of the car. For reassembly, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos