Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Arm Bushing of a Hyundai Getz

Model: Hyundai Getz MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Bushings

Video tutorial

Let's look at removing the front arm bushing of a Hyundai Getz. First, place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. Use a socket spanner to unscrew the lower securing bolt of the arm and the bolt mounted under the wheel hub, then unscrew the bolts on the upper part of the arm (as shown in the video).

Remove the bushing from the bolt housing. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them.

Start the installation of the new part: fit the new bushing and tighten all bolts to the specified torque. Double-check the correct tightening of the parts.

Refit the wheel to complete the job.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wishbone Bushes
How to Replace the Front Wishbone Bushes
Hyundai Getz (2002-2011 / MK 1) Place the car on a ramp and raise it to a comfortable working height. Remove the front wheel corresponding to the wishbone from which you will replac…
How to Replace the Front Brake Pads on a Hyundai Getz
How to Replace the Front Brake Pads on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To replace the front brake pads on a Hyundai Getz, lift the car so you can loosen the bolts securing the corresponding wheel. Remove the wheel from t…
Where to Find the OBD2 Port on a Hyundai Getz
Where to Find the OBD2 Port on a Hyundai Getz
Hyundai Getz (2002-2011 / MK 1) To locate the OBD2 port in your Hyundai Getz, follow these simple steps. First, sit in the driver's seat and ensure your Hyundai Getz is turned off. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos