Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Coolant Temperature Sensor Located in an Audi A3 and How to Replace It?

Model: Audi A3 MK 1, 8L - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Engine coolant temperature sensor

See other generations:
Video tutorial

In this video, you will see where the coolant temperature sensor is located in the Audi A3 and how to replace it, a very simple operation. As shown, it is located about halfway up on the left side of the engine, to your right when looking at the vehicle from the front.

To access it, simply remove the plastic cover by undoing the relevant bolts. If you need to remove it, first open the expansion tank cap to release some internal pressure, then extract the lower block using a screwdriver and disconnect the connector.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Locate the Fuse Boxes and Understand Their Schematics in an Audi A3 B5
How to Locate the Fuse Boxes and Understand Their Schematics in an Audi A3 B5
Audi A3 (1996-2003 / MK 1, 8L) In this video tutorial, the assignment schematics for the fuses in an Audi A4 B5 are shown, along with the location of the fuse boxes. The first fuse…
Where is the Turbo Pressure Sensor Located in the Audi A3?
Where is the Turbo Pressure Sensor Located in the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) In the Audi A3 8V, the turbo exhaust gas pressure sensor is located inside the engine bay on the driver's side. As seen in the attached video, to acc…
Reason for the air conditioner not working on an Audi A3/S3 8P.
Reason for the air conditioner not working on an Audi A3/S3 8P.
Audi A3 (2003-2013 / 8P, MK 2) The problem presented is a common issue with the air conditioning system of the Audi A3/S3 8P, but it is specific to the 1.6 or 2.0 TSI engine. The s…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos