Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Installing Wheel Spacers

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Wheel

See other generations:
Video tutorial

If you want to give your car a sportier and more aggressive look, installing wheel spacers to widen the track is certainly a good solution. Choose the appropriate spacers for your car by checking the number of holes, the bolt pattern, the diameter of the center hole (which should be as precise as possible to avoid wheel eccentricity), and the correct thickness (generally thicker in the rear and thinner in the front).

Along with the spacers, you will also need to purchase longer studs. Lift the vehicle, remove the wheel, clean the hub area of the rim with grease, then insert the spacer before remounting the wheel.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Install AUX in Audi A6 Models
How to Install AUX in Audi A6 Models
Audi A6 (2004-2012 / C6, MK 3) To install the AUX in Audi A6 models produced from 2004 to 2012, you will need to remove some parts of the vehicle's dashboard. As shown in the video…
Replacing the Wheel with the Spare on the Audi A6
Replacing the Wheel with the Spare on the Audi A6
Audi A6 (2011-2018 / C7, MK 4) This guide explains the procedure to remove and replace the wheel with the spare on the Audi A6. First, gather all the tools needed for the wheel rep…
Accessory Kit, Cup Holder Installation
Accessory Kit, Cup Holder Installation
Audi A6 (1997-2004 / MK 2, C5) Using a small flathead screwdriver, detach the trim around the cup holder and the turn signal button. Next, locate the retaining tabs of the cup hold…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos