Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue light of the Audi A6?

Model: Audi A6 MK 4, C7 - Years 2011-2018
Part: AdBlue warning light

When the AdBlue warning light appears on the instrument panel of the Audi A6, it means that the amount of additional fluid in the system is not sufficient. It will be possible to reset the warning light by topping up the fluid. To do this, it will be necessary to open the fuel door located on the right rear side of the car. This will allow you to remove the blue cap next to the fuel cap. Inside this vent, you can add the necessary amount of additional fluid to ensure that the warning light disappears completely.

Posted on 25 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue top-up warning light on the Audi A6 3.0 TDI
How to reset the AdBlue top-up warning light on the Audi A6 3.0 TDI
Audi A6 (2011-2018 / MK 4, C7) Today we will discover the steps that will allow us to reset the AdBlue fluid top-up indicator on the Audi A6 3.0 TDI. First of all, we get on board …
How to reset the AdBlue warning light on the Audi A6
How to reset the AdBlue warning light on the Audi A6
Audi A6 (2011-2018 / MK 4, C7) The AdBlue warning light comes on the instrument panel display of the Audi A6 model C7 when it is necessary to top up the liquid inside the tank. To …
How do you reset the AdBlue light on the Audi A6?
How do you reset the AdBlue light on the Audi A6?
Audi A6 (2018-2026 / MK 5, C8) To make the AdBlue warning light of the Audi A6 disappear from the instrument panel, it will be necessary to top up: to do this, you will need to pou…

Other guides you may be interested in

    Frequently Asked Questions

    • A6 2018-2026 - Could AdBlue cause problems in the Audi A6? Read answer

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos