Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Stabilizer Bar Links on an Audi A6

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

Today, this video tutorial will show you how to replace the front stabilizer bar links on an Audi A6, model C6. Start by securing the front wheels, then loosen the bolts and remove the wheel from its housing. Continue the replacement by unscrewing the fastening nut that connects the stabilizer bar to the shock absorber fork using a 16 mm wrench.

Remove the nut that connects the stabilizer link to the bar with a 16 mm wrench, and finally, remove the link. Using a 16 mm wrench, install a new bar, then tighten the fastening elements that connect the link to the fork and then the link to the bar. Remove the support from under the arm and treat the joints with copper grease, clean the brake rotor, and install the wheel.

Lower the car to the ground and tighten the tire properly.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Replacing the Anti-Roll Bar Bushings
Replacing the Anti-Roll Bar Bushings
Audi A6 (1994-1997 / C4, MK 1) The failure of the anti-roll bar bushings is a common issue on various car models, as they endure significant stress that can lead to breakage, resul…
How to Replace the Silentblock on Audi A6
How to Replace the Silentblock on Audi A6
Audi A6 (1997-2004 / MK 2, C5) Let's see how to remove and replace the silentblock on an Audi A6. Position your car on a column lift and raise it to a comfortable height for workin…
How to reset the TPMS on the Audi A6 MMI
Audi A6 (2011-2018 / C7, MK 4) In this video we can see how to reset the TPMS of the MMI on the Audi A6 version C7, but it works on most high-end Audis. The tires are set correctly…

How to Activate the Automatic Folding and Unfolding of the Wing Mirrors on the Jeep Compass

Follow these brief instructions to activate the automatic folding and unfolding of the external wing mirrors on the Jeep Compass. First, get inside the vehicle and turn on the ignition; then press the button located beneath the mirror glass adjustment to electrically open the mirror, as shown in the video. Pressing the button in the opposite direction will close the mirrors; by holding the button, the mirrors will open and close automatically!

Watch the video!


by ScegliAuto

More videos