Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper Motor on an Audi A3

Model: Audi A3 8P, MK 2 - Years 2003-2013
Part: Windshield wipers

If the rear wiper blade does not activate, the drive motor may be damaged. Since the device also integrates the washer, water may have infiltrated. To replace it, first remove the rear wiper blade by lifting the protective plastic cover over the fixing nut and removing the nut itself. Then, remove the internal trim panel of the tailgate by unscrewing the six fixing screws and releasing the clips. Finally, disconnect the power connector and unscrew the fixing nuts of the motor, proceeding in reverse for the installation of the new one.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear wiper on the Audi A3?
How to replace the rear wiper on the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) Replacing the rear wiper blade in the Audi A3 is extremely quick and easy, we don't need any tools. After obtaining the appropriate blade for the siz…
How do you replace the rear wiper blade on the Audi A3?
How do you replace the rear wiper blade on the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) To be able to replace the rear wiper blade on your Audi A3, you have to lift the blade and position it so that it is perpendicular to the rear window…
How to replace the rear windshield wiper of the Audi A3 8P
How to replace the rear windshield wiper of the Audi A3 8P
Audi A3 (2003-2013 / 8P, MK 2) In this video we can see how to replace the rear windshield wiper of the Audi A3 8P: replacing the rear windshield wiper is much simpler compared to …

How to Replace the Fuel Pump on an Opel Corsa C

Usually, upon the first ignition of the dashboard, a sound similar to a spray can be heard from the rear of the cabin: this is the fuel pump pressurising the system and preparing to supply fuel to the engine for ignition; if this sound is not heard, start by checking the integrity of the relevant power fuse, and if it is intact, verify that voltage reaches the power connector; if current is present, you can also try powering the pump directly to confirm it is faulty; replacing it is very simple, just disconnect the connector and hoses, then unclip the retaining ring and remove it to replace it with a new one.

Watch the video!


by ScegliAuto

More videos