Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to replace Ford Fiesta right fog light bulb

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK VI, Fiesta 6, MK 6 - Years 2008-2017
Part: Fog lights
Operation: How to replace Ford Fiesta right fog light bulb

The replacement of the fog light bulb on the passenger side, which is of the type with H11 connection (i.e. the lamp holder also integrates the terminal block of the power socket), can be carried out either by accessing from the underside of the vehicle by removing some protections, or, in a simpler way, by removing the lighthouse; therefore, once the headlight has been removed, it is easy to reach the seat of the fog light and unhook the bulb by rotating the entire lamp holder, disconnect the socket, connect the new bulb and insert it into the lamp holder, always rotating it until it fits correctly.


Posted on 24 September 2023 by ScegliAuto



How to replace the front fog light bulb of a Ford Fiesta.
Ford Fiesta (2017-2023 / MK VII, Fiesta 7, MK 7) Below we will see the guide that will allow us to disassemble and replace the front fog light bulb of the Ford Fiesta. First, let's move to the front
How to replace the fog light bulbs on the Ford Fiesta.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Today we will explain how to replace the fog light bulbs on a Ford Fiesta vehicle. The first thing to do is to remove the lower grille surrounding th
Replacing the fog light bulb in the Ford Fiesta.
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before proceeding with the replacement of the fog light bulb, in the Ford Fiesta, we place our car on a plane or on the deck. This precaution must be

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos