Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light of a Ford Fiesta

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Fog lights

See other generations:
Video tutorial

Watch this video to learn how to replace the fog light and its bulb on a Ford Fiesta. Start by removing the plastic grille frame around the side fog light on the bumper.

After removing the fake grille, unscrew the securing screws of the fog light with the appropriate screwdriver, then remove it from the bumper. Once the fog light is extracted, replace it with a new one, including a new bulb (same size and voltage).

Refit the fog light into the car's bumper with the covering. Test the correct operation of the lights.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Fog Light Bulb of the Ford Fiesta
How to Replace the Front Fog Light Bulb of the Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Below is the guide that will allow you to remove and replace the front fog light bulb of the Ford Fiesta. First, move to the front of the vehicle and…
How to Remove the Fog Light on a Ford Fiesta?
How to Remove the Fog Light on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The fog light is essentially an emergency light, as it is used in very low visibility conditions, typically due to fog. This tutorial shows how to re…
How to Replace the Rear Fog Light on the Ford Fiesta
How to Replace the Rear Fog Light on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's article, you will learn how to replace the rear fog light on the Ford Fiesta in case of faults or breakages. To remove it, access the whee…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos