Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 4, 8Y
- Years 2020-2024 To remove the rear cover of the driver's seat on your Audi A3, it is important to proceed carefully. After opening the rear door on the driver's side, carefully examine the cover to locate the fastening points or anchoring clips. Use the appropriate tools, such as a flathead screwdriver or a plastic lever, to gently release the cover without damaging it. Be sure to pay special attention to the clips or clamps to avoid breakage, and you will have successfully completed the disassembly of the rear cover of the driver's seat of your Audi A3.
Posted on 8 April 2024 by ScegliAuto
Other guides that may interest you |
Replace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |