Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
8V, MK 3
- Years 2012-2019 Resetting the tire pressure light in the Audi A3, as we can see in this tutorial, is an extremely simple and quick operation. Before doing this, we must have restored the correct pressure of each tire following the instructions in the manual. First, insert the key and turn on the instrument panel, then, using the large knob located in the central console, go to the "Vehicle" section and enter "Service & Checks". Next, select "Tire pressure monitor", perform the reset using the "Store tire pressure" option, and finally restart the vehicle.
Posted on 14 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the error of the VSC warning light and the ABS of the Toyota Rav4Let's see in this guide how to reset the error of the VSC warning light or the ABS of the Toyota Rav4, analyzing the possible causes. In fact, usually the VSC warning light appears almost always simultaneously with that of the ABS; it indicates a fault in the braking system, in particular in the brake pedal switch located behind the pedal, as shown in the video. Then we get on board the car, on the driver's side, and start by unhooking and removing our switch, disconnecting the electrical connector; then let's reassemble everything, checking that the errors have been cleared from the instrument panel! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |