Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the ECU of the Benelli TRK 251?

Model: Benelli Trk 251
Part: Control unit

Video tutorial

In order to reset the ECU of the Benelli TRK 251, you need to hold the throttle open while the instrument panel is off: continue to hold the throttle open, insert the ignition key into the ignition switch and turn it from position 1 to position 2 three times in a row. In this way, the instrument panel will turn on and off each time, triggering the ECU reset procedure; once this operation is completed, you will notice that the engine management ECU has been reset, eliminating all errors.


Posted on 30 April 2025 by ScegliAuto


Related tutorials

How to Replace the Clutch on the Benelli TRK 251?
How to Replace the Clutch on the Benelli TRK 251?
Trk 251 You can replace the clutch on the Benelli TRK 251 by loosening the screws that secure the side cover located on the right side of the bike: once the …
Coolant replacement for Benelli TRK 251
Coolant replacement for Benelli TRK 251
Trk 251 Today we will discover the instructions that will allow us to drain and then refill the engine cooling liquid of the Benelli TRK 251 motorcycle. Firs…
How to Change the Engine Oil in the Benelli TRK 251?
How to Change the Engine Oil in the Benelli TRK 251?
Trk 251 In this tutorial, you will see how to change the engine oil in the Benelli TRK 251, a very simple and quick operation. First, ensure that the engine …

How to Replace the Rear Brake Pads on a Benelli TRK 502X?

To replace the rear brake pads on a Benelli TRK 502X, loosen the screws that secure the corresponding caliper so that it can be detached from the brake disc: once the caliper is removed from its disc, you can proceed to detach it and remove the pin that secures the pads inside the caliper. At this point, you can remove the old pads from their seat to insert the new ones: these must be secured properly by positioning the caliper and checking that the brake is functioning.

Watch the video!


by ScegliAuto

More videos