Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can replace the front brake pads on a Benelli Leoncino 500 by loosening the screws that secure the brake caliper to the corresponding disc: once the caliper is detached, you can remove the pin that holds the pads inside the caliper so that you can insert the new ones. These can now be secured inside the caliper to fix it onto the disc: after installation, secure everything with the screws and check the functionality after replacing the components.

Posted on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front brake pads of the Benelli Leoncino 500
Leoncino 500 Today's instructions will illustrate the procedure for disassembling and replacing the front brake pads of the Benelli Leoncino 500 motorcycle. First…
How to Replace the Rear Brake Pads on a Benelli Leoncino 500?
Leoncino 500 To replace the rear brake pads on a Benelli Leoncino 500, loosen the bolts securing the brake caliper to the corresponding disc. Once these bolts are…
How to replace the brake and clutch levers of the Benelli Leoncino 500
Leoncino 500 Today we will discover the instructions that will allow us to disassemble and replace the brake and clutch levers of the Benelli Leoncino 500 motorcy…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos