Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The instructions in this guide will show you how to install additional lights on the Benelli TRK 502X motorcycle. First, place the bike on the centre stand and start preparing the additional lights (or fog lights) on the side bars; then route the power cables to the fuse box, as shown in the video. Ensure the cables run internally, installing additional sleeves if necessary to protect them from the weather; a switch will allow you to turn the lights on and off.

Posted on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Additional Lights on Benelli TRK 502X
How to Install Additional Lights on Benelli TRK 502X
Trk 502x This guide shows how to install additional lights on the Benelli TRK 502X in simple and quick steps. First, place the motorcycle on a stand and prepa…
How to replace the coolant of the Benelli TRK 502X
How to replace the coolant of the Benelli TRK 502X
Trk 502x These brief and simple steps will illustrate the procedure for replacing the engine coolant of the Benelli TRK 502X motorcycle. First, we put the mot…
How to Set the Time on a Benelli TRK 502X
How to Set the Time on a Benelli TRK 502X
Trk 502x In this tutorial, you will see how to set the time on a Benelli TRK 502X, a very simple and quick operation to perform, for example, after disconnect…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos