|
Do it yourself
| |||
| ||||
|
Model: Benelli Tnt 135
To replace the exhaust on the Benelli TnT 135, you need to loosen the screws that secure the exhaust tip to its housing, located at the rear mudguard on the right side. Once the fixing screws of the supports are loosened, you can also detach the connecting clamp positioned between the exhaust and the collector so that the tip can be removed. Now, position the new exhaust, connecting it to the collector with its clamp; then it can be secured to the respective supports.
Posted on 24 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Tnt 135
The replacement of the muffler on the Benelli TnT 135 is done by loosening the bolt that secures the muffler to its support at the top, at the rear o…
Tnt 135
To replace the battery on the Benelli TNT 135, insert the key into the designated side lock of the bike, near the seat. Remove the seat to access the…
Tnt 135
To replace the clutch on a Benelli TnT 135, loosen the screws that secure the specific cover located on the right side of the bike, near the gear lev…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
