Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Benelli Trk 502
Part:

If you have a Benelli TRK 502, you will know that the bike has above-average vibrations and annoying metallic noises. To eliminate them, follow this procedure: open the passenger seat and remove the rider's seat. Unscrew the three screws that secure the tank and those that fix the fairing (there are two under the windscreen). With the tank 'free', push it forward with one hand while using the other to push the end of the black fairing towards the rear. Unscrew the two screws that secure the tank cover and place it to the side. Lift the tank from the rear and disconnect the hose, then move it from its seat. Unscrew the bolts related to the air filter housing and remove this as well. We are almost there! Now unscrew the plate and place some washers or rubber underneath it.

Updated on 1 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…
How to Change the Coolant on the Benelli TRK 502
How to Change the Coolant on the Benelli TRK 502
Trk 502 In this video tutorial, you will see how to bleed the cooling system and replace the coolant on a Benelli TRK 502 in simple steps. To remove the old …
How to Perform an Oil Change on a Benelli TRK 502
How to Perform an Oil Change on a Benelli TRK 502
Trk 502 Let’s go through the procedure for performing routine maintenance by changing the engine oil and oil filter on a Benelli TRK 502. First, place the mo…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos