Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Use the appropriate key to remove the passenger seat and unscrew the two bolts underneath. At this point, you can remove the main seat. Now unscrew the exposed screws that were under the seat and the one near the handlebars that secure the fairing between the seat and the handlebars, above the tank. This fairing is also secured by side screws. Unscrew the tank (preferably when almost empty, otherwise it’s quite heavy) and remove it. You're almost there: finally, lift the cover over the spark plugs, disconnect the connector, and unscrew the plugs with an 8 mm key. Proceed in reverse for reassembly.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Spark Plugs on Benelli TRK 502
Replacing Spark Plugs on Benelli TRK 502
Trk 502 In this video, we will show you how to remove and replace the spark plugs on a Benelli TRK 502 in simple steps. First, remove the side plastic fairin…
How to Replace the Spark Plugs on a Benelli TRK 502?
How to Replace the Spark Plugs on a Benelli TRK 502?
Trk 502 To replace the spark plugs on a Benelli TRK 502, loosen the screws securing the fuel tank to its housing: these screws are located on the sides of th…
How to Reset the Engine Light on a Benelli TRK 502
How to Reset the Engine Light on a Benelli TRK 502
Trk 502 Before you can begin, sit on the seat of your Benelli TRK 502. Start by setting the engine start switch to the active position. Then, fully rotate an…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos