|
Do it yourself
| |||
| ||||
Model: Benelli Bn 302
It is recommended to use 15W-50 oil. Start the engine for a few minutes to warm the oil, making it more fluid for quicker drainage. Unscrew the lower drain plug of the engine oil sump and also the upper plug to prevent a vacuum and facilitate the outflow. Collect the used lubricant in a container, close the drain hole, and insert the new oil through the upper filler hole. Check the cleanliness of the oil filter, which can be removed by unscrewing it. Replace or clean it depending on its condition.
Updated on 4 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Bn 302
Let's briefly discover how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Benelli BN 302. First, plac…
Bn 302
This guide explains how to carry out the routine maintenance oil change on the Benelli BN 302 motorcycle. First, place your motorcycle on a stand and…
Bn 302
Today, remove the Torx screws located under the instrument panel to detach the headlamp. Next, unscrew the screws from the bulb cover to access the b…
|
How to Replace the Air Filter on a Honda CB500X?
Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
