Do it yourself
| ||||
|
Model: Benelli Tnt 150i
The replacement of the Benelli TnT 150 engine oil is carried out by unscrewing the drain plug of the tank containing the oil, located in the lower part of the motorcycle. Once this has been unscrewed, it will be possible to go and place a container under it, so that the oil is completely collected. Then you can close the cap once everything is finished and unscrew the screws that fix the casing on the right side of the bike: under it you will find the oil filter, which must be extracted and replaced. After replacing the filter, it will be possible to top up the oil by inserting the oil in the breather located on the crankcase next to that of the filter.
Posted on 14 May 2024 by ScegliAuto
|
How do you replace the air filter of the Ducati Streetfighter V2?In order to replace the air filter of the Ducati Streetfighter V2, you need to loosen all the screws that secure the seat of the bike to its housing, so that the seat can be completely detached. Once the seat has been removed, it will be possible to unscrew the screws that secure the tank in its rear part, along with those that secure it in the side parts. At this point, the tank can be completely lifted and the filter box underneath opened: this filter can now be removed from its seat to insert the new one. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |