Do it yourself
Frequently asked questions about cars and motorcycles
Follow the necessary instructions to remove and replace the rear brake pads of the Benelli TNT 150 motorcycle in simple and quick steps. First, place your motorcycle on a stand and begin unscrewing the fixing bolts of the rear brake caliper using an Allen key; then remove the brake caliper from the disc, as shown in the video. Now, lever on the caliper piston to retract it, removing the old pads; clean the caliper of any residual dirt and install the new pads, following the video tutorial to the end!

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Tnt 150i To change the engine oil of the Benelli TnT 150, first, remove the drain plug located at the bottom of the bike's oil reservoir. Once removed, positi…
Tnt 150i This brief and simple guide shows how to remove and replace the engine air filter on a Benelli TNT 150i, following the instructions below. First, pla…
Tnt 150i To replace the air filter on a Benelli TnT 150i, you need to loosen all the screws around the seat that secure it. Once the screws are removed, you c…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos