Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Sprocket and the Crown of the Benelli TNT 600

Model: Benelli Tnt 600

Video tutorial

Today's guide will show you how to disassemble and replace the sprocket and the transmission crown of the Benelli TNT 600 motorcycle. First, place the motorcycle on a stand and start unscrewing the screws of the sprocket cover; then unscrew the central nut of the sprocket and disconnect the drive chain from it, as shown in the video.

At this point, remove the rear wheel and unscrew the fixing screws of the crown to remove it; then install the new crown and the new sprocket suitable for the transmission of your motorcycle, reassembling the rear wheel and the chain!


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Replace the Chain and Sprocket on a Benelli TNT 600
How to Replace the Chain and Sprocket on a Benelli TNT 600
Tnt 600 These brief and simple steps will show you how to disassemble and replace the chain and sprocket on a Benelli TNT 600 motorcycle. First, place the mo…
How to Replace the Battery of the Benelli TNT 600?
How to Replace the Battery of the Benelli TNT 600?
Tnt 600 To replace the battery of the Benelli TNT 600, loosen the screws securing the seat on the right and left side, then remove it from its housing. Once …
How to Replace the Battery in a Benelli TNT 600
How to Replace the Battery in a Benelli TNT 600
Tnt 600 To replace the battery in the Benelli TNT 600, loosen the screws securing the seat on the left and right sides, then remove it from its position. Onc…

An Affordable Modification to Solve a Problem on the Yamaha MT07

This video shows how to solve a problem affecting the Yamaha MT07 with a very affordable modification. This bike requires a specific movement of the throttle grip to accelerate, which forces the right wrist into an unnatural twist. You can remedy this by fitting the throttle control from the R6, which reduces the rotation from 90° to 45°; the cost is under £25 even when buying the original part directly from the dealership. As shown, the disassembly and reassembly work is extremely simple; just be careful not to let the throttle guide slip, as it has its seat directly in the cover. You can see the difference in hand position after replacing the grip.

Watch the video!


by ScegliAuto

More videos