Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of the Benelli 180S?

Model: Benelli 180s
Part: Engine oil

Video tutorial

To change the engine oil of the Benelli 180S, you need to loosen the drain plug located at the bottom of the vehicle, in the central area: once this plug is removed, you can collect all the used oil in a suitably positioned container. This way, you can close the drain plug again and remove the oil filter, which is also located in this position: after replacing the filter, you can top up by adding the necessary amount of engine oil through the breather on the right side of the vehicle.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Access the Battery in the Benelli 180S?
How to Access the Battery in the Benelli 180S?
180s In this tutorial, you will see how to access the battery in the Benelli 180S, a very simple operation useful if you need to recharge or replace it. F…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos