Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Bentley Continental GT remote control?

Model: Bentley Continental GT MK 1 - Years 2003-2011
Part: Key

In this tutorial we can see how to replace the battery of the Bentley Continental GT remote control, a very simple and quick operation. To do this, we will need a small screwdriver with a flat tip and a replacement battery of type CR2032. First of all, extend the metal key by pressing the appropriate button, then lever the indicated edge and remove the rear cover. Next, remove the old battery using the screwdriver, insert the replacement battery respecting the polarity and reassemble everything following the reverse procedure.

Posted on 26 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp of a Bentley Continental GT
How to Remove the Front Headlamp of a Bentley Continental GT
Bentley Continental GT (2018-2024 / MK 3) To replace the front headlamp of the Bentley Continental GT, loosen the screws securing the front bumper to its housing: the fixing screws are locate…
How to Replace the Cabin Filter on a Bentley Continental GT?
How to Replace the Cabin Filter on a Bentley Continental GT?
Bentley Continental GT (2018-2024 / MK 3) To replace the cabin filter on a Bentley Continental GT, lift the bonnet to access its upper internal part: here you will find two cabin filters. You…
How to reset the service light on the 2010 Bentley Continental GT
How to reset the service light on the 2010 Bentley Continental GT
Bentley Continental GT (2003-2011 / MK 1) If you own a first-generation Bentley Continental GT (2010) and want to find out the steps to follow to complete the manual reset of the service ligh…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos