Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in a 2005 Bentley Continental GT

Model: Bentley Continental GT MK 1 - Years 2003-2011
Part: Battery

To remove the battery from the 2005 Bentley Continental GT, open the bonnet and remove the plastic cover of the air filter by undoing the six Torx T27 screws. Once removed, disconnect the positive and negative battery connectors. Go to the boot and, after opening the left compartment, remove the terminal connector by unscrewing the 13 mm bolt. Take out the battery and replace it with a new one. Reassemble everything in position and reconnect the terminals. Repeat the same procedure for the battery located in the right compartment.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Bentley Continental GT remote control?
How to replace the battery of the Bentley Continental GT remote control?
Bentley Continental GT (2003-2011 / MK 1) In this tutorial we can see how to replace the battery of the Bentley Continental GT remote control, a very simple and quick operation. To do this, w…
How to Replace the Remote Battery for the Bentley Continental?
How to Replace the Remote Battery for the Bentley Continental?
Bentley Continental GT (2018-2024 / MK 3) In this tutorial, see how to replace the battery in the remote for the Bentley Continental, a very simple and quick operation. For this, you will nee…
How to Change the Engine Oil on the Bentley Continental GT?
How to Change the Engine Oil on the Bentley Continental GT?
Bentley Continental GT (2003-2011 / MK 1) To change the engine oil on the Bentley Continental GT, loosen the drain plug on the oil sump located at the bottom of the engine bay. Position a con…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos