|
Do it yourself
| |||
| ||||
How to Replace the Horn on the Beta Xtrainer?
Model: Beta Xtrainer
Video tutorial
To replace the horn on the Beta Xtrainer, loosen the screws securing the actuator of the device to its housing. This will be located at the front of the bike and can be accessed by removing the front panel of the fairing. Once removed, loosen the screws securing the device and disconnect the appropriate connectors. This way, you can position the new part in its housing, securing it with the appropriate screws so that you can then cover everything with the designated panel.
Updated on 26 October 2026 by ScegliAuto
Related tutorials
Xtrainer
To replace the clutch lever on the Beta XTrainer, loosen the screw located at the top of the lever, which also acts as a pivot. Once this screw is re…
Xtrainer
In order to replace the counter shaft seal of the Beta Xtrainer, you need to loosen the nut that secures the sprocket, located on the left side of th…
Xtrainer
To replace the air filter on the Beta Xtrainer, you need to remove the left side panel located just below the seat. This should be removed by unfaste…
|
How to Reset the Service Light on a Vespa Sprint 150?
To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
