Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Xtrainer
Part: Air filter

To replace the air filter on the Beta Xtrainer, you need to remove the left side panel located just below the seat. This should be removed by unfastening its fixing clips. The filter will be located underneath and can be pulled out by detaching the sponge part from the plastic support. At this point, insert the sponge part of the new filter onto the plastic support and place it back into its housing. After installation, close the filter by reattaching the side panel.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Xtrainer The procedure for replacing the air filter on the Beta Xtrainer involves removing the left side panel located immediately under the seat. This panel …
Xtrainer The air filter replacement on the Beta Xtrainer can be done by disconnecting the left side panel located immediately under the motorcycle seat. This …
Xtrainer You can change the engine oil on the Beta Xtrainer by unscrewing the drain plug from the oil sump located at the lower central part of the bike: once…

How to Replace the Engine Cover on a Honda CB 650R

This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly.

Watch the video!


by ScegliAuto

More videos