Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Xtrainer
Part: Air filter

The procedure for replacing the air filter on the Beta Xtrainer involves removing the left side panel located immediately under the seat. This panel must be removed by unfastening its clips: the filter will be located in the area below and can be removed by disconnecting the sponge part from the plastic support. At this point, it will be possible to insert the new filter on the appropriate plastic support and insert everything into its housing. After installation, it will be necessary to close everything and verify its operation.

Posted on 18 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Xtrainer To replace the air filter on the Beta Xtrainer, you need to remove the left side panel located just below the seat. This should be removed by unfaste…
Xtrainer The air filter replacement on the Beta Xtrainer can be done by disconnecting the left side panel located immediately under the motorcycle seat. This …
Xtrainer To change the engine oil on the Beta Xtrainer, loosen the drain plug located at the bottom of the bike in the central position. Unscrewing this plug …

How to Replace the Key Battery on a BMW R1250GSA

To replace the key battery on your BMW R 1250 GSA, start by locating the opening slot on the key. Once you have found the slot, use a small screwdriver or a coin to carefully pry open the key. Find the existing battery and remove it carefully. Ensure you insert the new battery with the correct polarity. Close the key securely and check that it is properly sealed. Finally, test the key to ensure it works correctly. If in doubt, consult the owner's manual for detailed instructions.

Watch the video!


by ScegliAuto

More videos