Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Xtrainer
Part: Air filter

The air filter replacement on the Beta Xtrainer can be done by disconnecting the left side panel located immediately under the motorcycle seat. This panel must be removed by unfastening its clips: the filter will be found in the area below and can be removed by detaching the sponge part from the plastic support. At this point, it will be possible to insert the sponge part of the new filter above the plastic support and insert everything inside its housing. After installation, the filter must be closed by reinserting the panel.

Posted on 16 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Beta Xtrainer?
How do you replace the air filter of the Beta Xtrainer?
Xtrainer The procedure for replacing the air filter on the Beta Xtrainer involves removing the left side panel located immediately under the seat. This panel …
How to Replace the Air Filter on the Beta Xtrainer?
How to Replace the Air Filter on the Beta Xtrainer?
Xtrainer To replace the air filter on the Beta Xtrainer, you need to remove the left side panel located just below the seat. This should be removed by unfaste…
How to Change the Engine Oil on the Beta Xtrainer?
How to Change the Engine Oil on the Beta Xtrainer?
Xtrainer You can change the engine oil on the Beta Xtrainer by unscrewing the drain plug from the oil sump located at the lower central part of the bike: once…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos