Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Alp
Part: Valve

You can adjust the valves on the Beta Alp by loosening the screws that secure the specific cover, which is located on the left side of the bike and on top of the engine block. Once the valve cover has been removed, you will be able to locate the underlying valves: the clearance of these valves should be adjusted using a feeler gauge, following the values indicated in the manual. Once the adjustment has been made, reposition the cover, ensuring everything functions correctly.

Posted on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Beta Alp?
How do you replace the exhaust pipe of the Beta Alp?
Alp To replace the exhaust pipe of the Beta Alp, you need to loosen the screws that fix the component to its housing, on the right side of the fender of …
How to replace the battery of the Beta Alp?
How to replace the battery of the Beta Alp?
Alp To replace the battery of the Beta Alp, remove the seat by unscrewing the appropriate fixing bolts. Once the seat is removed, you will have access to…
How do you replace the exhaust of the Beta Alp?
How do you replace the exhaust of the Beta Alp?
Alp To ensure that the muffler of the Beta Alp is replaced, you will need to loosen the screws that fix the exhaust terminal to its housing: these screws…

How to Replace the Coolant in the Yamaha FZ6 Fazer

This guide shows you how to drain and refill the engine coolant of the Yamaha FZ6 Fazer motorcycle. First, place the bike on its centre stand and start unscrewing the drain screw on the water pump casing, allowing it to drain into a container for about ten minutes; then unscrew the radiator cap and refill with new antifreeze, as shown in the video. Ensure you fill it to the maximum level, then start the engine and top up if necessary!

Watch the video!


by ScegliAuto

More videos