Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Alp
Part: Exhaust muffler

To replace the exhaust pipe of the Beta Alp, you need to loosen the screws that fix the component to its housing, on the right side of the fender of the motorcycle: once the screws that fix the exhaust pipe have been loosened, it will be possible to proceed by widening the clamp that connects the exhaust pipe and the collector. Then you can completely remove the old exhaust pipe from its seat and insert the new one: the new exhaust pipe must be properly fixed with screws on the supports and must also be connected to the collector by inserting the corresponding clamp.

Posted on 30 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust of the Beta Alp?
How do you replace the exhaust of the Beta Alp?
Alp To ensure that the muffler of the Beta Alp is replaced, you will need to loosen the screws that fix the exhaust terminal to its housing: these screws…
How to Adjust the Valves on the Beta Alp?
How to Adjust the Valves on the Beta Alp?
Alp You can adjust the valves on the Beta Alp by loosening the screws that secure the specific cover, which is located on the left side of the bike and o…
How to Replace the Air Filter on a Beta Alp
How to Replace the Air Filter on a Beta Alp
Alp To replace the air filter on a Beta Alp, loosen the bolts securing the seat so that it can be lifted and removed from its housing. This will provide …

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos